This is from the wheel fitment thread.
Quote:
|
Originally Posted by DarrenDriven
"WHEN LOWERED 1" YOU WILL NEED TO REDUCE THE FRONT OFFSET BY 2MM AND THE REAR OFFSET BY 5MM FOR PERFECT FLUSHNESS"
|
Is this a linear correlation? As in, if I lower my car 1.5" will I then need to adjust offset in the front by 3mm and the rear by 7.5mm? Or is this a logarithmic/exponential correlation? In short I am planning on installing 17x9" with 245/40r17 on all four tires and plan on lowering the car 1.2-1.4" with the H&R Super Sport Springs. And was trying to figure out offset and if I will be able to sufficiently fix camber issues with camber bolts.