|
Surprisingly, I have no wobble and I can actually drive okay.
Here is what is not okay. I have like a few degrees camber in front. Almost looks like \ but not quite that far. My alignment shop is ordering camber bolts to correct it at the height I'm at. Assuming those will give me the negative camber / flush look in the front? The back looks absolutely perfect.
Alignment is happening tomorrow.
As for the veering off to the right issue while braking, here is what I've come down to
A) It's a crimped brake line that might need to be readjusted in the back
B) Master Cylinder Brace is too tight (Not sure if that affects it)
C) Something else is screwed up!
|