Sounds like you've done your research. I don't think the 9" +45 will fit up front on stock suspension.
Quote:
Originally Posted by svodka
Hey guys I'm looking into the following setup:
17x9 +45 enkei kojins on stock suspension
245/40/17 tires
I've done a lot of reading and it sounds like I may need a spacer to make this work on stock suspension in the front. I was looking into adding a 10mm hubcentric H&r spacer to the front wheels to add clearance from the strut. I am not concerned with flushness or poke, as long as it has enough clearance to fully lock the wheel with no rubbing.
I will eventually drop it ~1" or so but not right now. Likely just springs, not coilovers. I'll worry about correcting the camber later. Any input would be great. Thanks!
|
__________________
New: 2014 6MT Asphalt Rota Titan 17x9, RS-3 V2, Skunk2 Pro-C, Eibach Sway Bars, Password:JDM Strut Tower Bar, Perrin MCB, StopTech Stainless Lines, Hawk HP+, Nameless 3" Exhaust, VG Sharkfin, FIVE:AD Spoiler, DDM Tuning HID's 5k, HID
Old: 2013 6AT Boosted Firestorm..
|