[Killerbee]

Originally Posted by NYCsubaruBRZ

more poke if possible (maybe 5-8mm) and actually the wheel gap looks good for my taste.

http://www.ft86club.com/forums/showp...&postcount=210
this one looks best to me but i would like it to poke more.

This helps alot
The pictures show 18x8.75 +35 (+35 means mm, so if you want it to poke 10mm more it will be +25 and so on)

So you're basically looking either at something like 17x8.25 +20 or, if 18" is ok aswell, 18x8.75 +25 or even +20. I'm however not sure what XXR offers in the 17", and I've only seen in 18" the +20 Wheels, so you may have to think about getting a smaller offset and add some spacers to the wheels to get your desired offset.

However you may need to do some fenderwork with that setup. I suggest to read this whole thread as there are some with poking setup in here.

I've linked some post to start you off
http://www.ft86club.com/forums/showp...&postcount=790
http://www.ft86club.com/forums/showp...&postcount=923
http://www.ft86club.com/forums/showp...&postcount=670