Quote:
Originally Posted by Wes
The squirrel finders are located right behind the projector where you put the lights into. Wear some gloves to prevent any oils and stuff and you'll feel like a flat square tab and just push it down.
Just let it dry for a couple of hours and you can just put everything back together.
|
Thanks i finally finished re-installed and everything. Plasti Dip works and it didn't melt but i would perfer using true paint instead; ill try to post pictures but i used black plastidip with 6 coats and 2 coats of glossifier trying to get a true gloss black look instead i got a grayish weather strip color ill try to post some pics if i can!
All in all it took me about 12 hrs from start to finish it even stormed when i was finishing up but i made it
Thanks Darren for the Writeup and Wes for your help; ps i never took apart anything on this car i followed Darren DIY and everything came out great thanks!