Quote:
Originally Posted by Wes
1. Theres been a gap between projector and reflectors, but if your lights aren't put back completely flush then the gap will be slightly larger.
2. Yeah the projectors are different since the passenger side is slightly lower than the drivers side so it won't glare at opposite side of traffic.
3. The side markers clips are probably slightly bent making, just look up a pic of the side marker tab A and just use a hair dryer to heat up the tab and then get pliers and slowly bend it back bit by bit. Make sure you keep it hot so you don't snap that dam thing. Takes some time (happened to me too  )
Need it like this
Yes it does work. |
Thanks i just did my headlights like 6 or 7 coats for the bezel and i also sprayed the high beam reflector cause i live in the city using black plastidip im almost finish about to put my 2nd coat of glossifier. How long do i have to leave it out to dry before i can put it back in the oven and reseal it or can i do it immediately after finish spraying the plastidip?? Thank You