Quote:
Originally Posted by Yruyur
So is our cutoff correct or should the dips line up so there is only one?
Also is it possible to "focus" the beam by moving the bulb in or our of the housing. I thought I recall the bulb sitting on something that coukd be moved via a nut.
Sent from a Motorola DynaTAC 8000X
|
From this pic below, I think the left one is almost perfect, except for that left side of the driver side that seems to be bowing down too much.
As for the right one, the driver side bows down the sides a bit too much on the right. The hotspot of the passenger side also seems a bit too high that the actual usable light gets lost in the cutoff.
So yeah, the top lines of both cutoffs should line up. The dips shouldn't though, the space between them should equal your headlight horizontal spacing.
I wouldn't really worry too much though, these are the Mini H1 projectors and they will rarely be perfect. I would say the left one is a 9, while the right one is 8.5.