Quote:
Originally Posted by GaDgeT
From my experience, my 1st MS-8 died with a 'blue light of death' and had to be replaced within the 1st month. A mate of mine who was competing with this DSP had to bypass and disconnect as the remote on powering the amps was causing a loud popping noise on startup. As mentioned, each will have their pros and cons, and you cant run logic 7 on the MS-8 without a center channel installed, but would be an easy install and tune for a 2 way active setup with your imagines + sub
|
I am going to need to do some more research into this and probably work closely with my installer. He was not keen on the MS-8 either. Said he has had lots of issues with them. I am not afraid to rollup my sleeves and learn if there is good documentation and support out there. I am using some complex software (REW) on my laptop at home to measure my home theater audio. There was some learning curve but a great deal of support out there.