Quote:
Originally Posted by gdrider77
Yeah, i understand, i just feel with my luck, i will tighten it too much and strip/break the bolt head. And then i am in a much more serious spot. I have already done the "very tight" and still a slight leak. I can put a breaker bar on the wrench for more leverage, but i am afraid i then risk breaking the head or stripping. Maybe just pulling it out and putting some thread seal will do the trick.
Thanks!
|
I had a leak there too. I put thread sealant and tighten it GOOD, and it stopped the leak. It was a B*tch to tighten too, as I didn't want to take anything off. A crowfoot wrench set did the trick!