Quote:
Originally Posted by FR-Slide
So is MetalCast + Spraymax the best combo for this project still? Really interested in tackling this next week, but a few quick questions, since I've got Amber LED turn signals:
1) If I red out the entire light, will the signals show properly? Will they be red, amber, something in-between?
2) If I opt to leave a "window", is there any guidance on masking properly/accurately? Also, will I need to sand/polish the un-painted portion of the light prior to clearing? And, if so to that, is there a time-limit to wait on sanding (I don't want to catch an edge when sanding)?
Thanks!
|
1) If you do the whole thing then the lights will just pretty much show red
2) Probably not, but the way I see it is to mask out the surrounding then fill the inside. Well I don't think you need to sand/polish since that part will have been masked anyway. Wondering about the time limit for sanding as well, anyone?
Planning to tackle this soon
Edit: Finally did this! Happy with results, but still need to wet sand and polish when it is fully cured these were the products that I used:
Result:
