Quote:
Originally Posted by rockers_kitoy
hahay.... kinda disappointed for my 1st mags&tire change.
i didn't recognize that the size of the 'holes' will be taken into consideration (114 for my mags vs. 108 for our t86) and after fitting in, it didn't fit. tsk 
and so, where can you suggest a good or better place for find mags (17-inch)?
thanks in advance. |
@
rockers_kitoy,
The bolt pattern and PCD of our cars are 5 x 100 and not 5 x 108. You also have to consider the offset and width of the mag wheels you are choosing. For offset, the safe values are from +35 to +48. The lower the offset the more it will stick out from the fender. The higher the offset the more it is tucked into the fender. In terms of width, the safe values are from 7.0 to 9.5 inches. For reference our stock mags are 5x100 bolt pattern, 17 inches in diameter, 7.0 inches in width, offset +48.
For mags (17 to 19 inches) that would fit your 86 you can source them from:
Originals:
AUTOPLUS SPORTZENTRIUM, AUTOLINE MOTORSPORT and TYRE RACK
ROTA and LINEA CORSE mags:
STIVO CONCEPTS
Original and Replica mags:
AUTOKOZMETIX, BANAWE CAR CARE CENTER, BENS OK, BLUELINE CAR ACCESSORIES, CONCEPT ONE WHEELS, GARAGE ONE, GOMAGS, KO HIGH OCTANE MARKETING and almost any mags shop in Banawe.
You will have more options in terms of design if you went with 18 inch mags.
You can make arrangement with them to ship to Koronadal if your car is not in Metro Manila.
Hope this helps.