I guess its time that I join the crew and make a build thread! Slowly building the car into STX after a few good years in CSP with this;
I currently have some backing helping me along from:
Chasebays.com
Corr Performance Tuning
and potentially some others
Current mods:
KW V3's, different spring rates
Vorshlag Camber Plates
Stranos 22m Front Bar
Whiteline Front Endlinks
Kartboy Rear Endlinks
Lamin-X yellow fogs
Clear sidemarkers
Ebay silicon sound tube delete
K&N drop in Filter
Chase Bays Stainless Brake lines
Chase Bays Grounding and Charging kit.
17X9 +35mm Matte Bronze RPF1's
255/40/17 RS'3
Invidia N1 Catback
JDL UEL Headers/Overpipe/Catted Front Pipe
Invidia N1 Catback
Project Mu +800 Front and Rear Pads
ATE Super Blue Fluid
Motul 0W20 300V
Motul Gear 300 (Trans)
Motul Gear 300 LS (Diff)
Whiteline trans, diff, subframe, and all suspension bushings
Swift Springs
Kartboy Short Throw
Kartboy Shifter Bushings
Kartboy Crank Pulley
TIC Steering Rack Bushings
Planned Mods:
Seats
Rear lower control arms
Brake kit (99% sure it will be AP/Essex)
For the time being this car is my daily driver and will be until about spring of next year. I plan to do all the major things that really improve the car first like dialing in suspension before I worry about minor details to the extent of the rulebook. After that will be power adders and weight savings mixed together, which ever order of things does the largest bang for the buck at a time.
Last but not least here is a picture of the car as at its first event, stock suspension at the time. Also, thanks to Scooby South for some setup discussion.
Video of fastest run, first in STX by .4XX and 7th out of 41 in PAX in a pretty much stock car with wheels and 380 tread wear tires at the time.
[ame="http://www.youtube.com/watch?v=xnq9xot8bxI&feature=share&list=UUALlMc16gV tUiEC_ILWb2EA"]7.13.13 11 STX Fastest run NOLA Motorsports Park - YouTube[/ame]