This is full compliance for T7019A Android. $14,95. Very small. Night vision it's ok.
http://www.ebay.com/itm/360633507954...84.m1423.l2649
Sideview and Frontview pictures.
To install on BRZ:
Hole of 19 mm (trunk fascia need to be removed)
1. wire red 12+ to red 12+ of HU harness (where is located fuse)
2. wire black (ground) to chassis or HU harness ground (black)
connect VGA cable camera and HU
3.
wire brown "reverse" on HU harness to pink wire no. 5 of primary harness (beside indoor fuse main unit). You need 50 cm of adding cable.
