Quote:
Originally Posted by Yruyur
The cel was for running rich. He has the unichip, injen and trd exhaust. I cleared the cel and we did some data logs for him to send to unichip.
Sent from a Motorola DynaTAC 8000X
|
He should try the -fuel trim flash from the unichip site. The "- Fuel, Injen CAI - all Cat Back" file should fix it.
If he needs to flash the Uni Chip I can help, I have all the stuff to do it with.
Might also want to look inside the Injen pipe to see if it has bad welding, some do and cause turbulence in the air stream making the MAF read wrong
And post the issue here so UniChip Jack can help too
http://www.ft86club.com/forums/showthread.php?t=25211