Here's how I changed my vortech supercharger pulley while unit was still attach to car. Not using a impact gun
stay tuned... making dinner and uploading pictures
NOTE I AM NOT RESPONSIBLE FOR ANY DAMAGE TO VEHICLE, VORTECH BLOWER OR OTHER WISE EXTRA TUNING IS REQUIRED TO USE A SMALLER PULLEY
Tools needed
14mm wrench x2 one needs to be the bendy self ratcheting
10mm 1/4 inch socket
flat head screw driver
propane torch the hand held kind
BLUE I repeat BLUE locktite
oil filter removal pliers ( yes that sounds crazy)
Oh and a smaller vortech supercharger pulley in this case my 3.125"
and a tune you need a tune!! don't go bolt this on and "just see how it feels" on the stock pulley programing!
1) remove belt cover on ac condessor (driver side)
2)completely remove top charge pipe.
3)remove grey plastic cover on back of blower pulley with a flathead. (try not to damage black washer)
3) now ready to begin pulley swap
please let me know if I screwed something up in the DIY