[Visconti]

Thought I take a moment and share some information that is almost impossible to figure out unless you actually following my "Visconti Tuning - Latest BRZ Info" Thread.. which can be very boring at times.

For the longest time I've stated there was really no need to have a STG1 and STG2 tune for the BRZ.

Last month during my normal "Let's try to improve what we're selling" dyno sessions I noticed a tune change that made a improvement on a car with a header, but hurt the car without the header.

Exhaust system didn't have any effect on the gain or loss.. I tested this on several cars which is why it took me so long to actually notice the gain / loss on different cars.

So this means if your a Visconti customer and you have a STOCK Header, you'll want to request a STG1 tune.

If you have a aftermarket header, you'll want my STG2 flash.

At this time only the header is what makes you STG1 or STG2 with Visconti Tuning.

For those of you who are wondering, our STG2 does NOT cost anymore.

If you already have a tune with us, it's considered a free update.

Like always this is just one of the new things going on right now.

We have a few other things in the works for you non-forced induction guys.

Thanks

John