Quote:
Originally Posted by 200hp/tonne
MS uses Freescale MPX4250AP, 14$ from Digikey.
On a side note, if you are shooting for low boost levels, 3 psi of boost at 7500 rpm only needs 5 hp compressor work at 70% comp. efficiency. So if you upgrade to a 320 amp alternator, you maybe don't need a capacitor bank...
Combustion engg here, my EE knowledge is sketchy at best.
|
At what mass flow? But it's probably close for 25# per minute.
An old friend of mine measured drive power required for a Vortech supercharger at about 500hp, and like 10 or 12 psi. It was something 40 hp! It's a very steep curve as you start to move some air.