[Trap63]

Originally Posted by GreenPants

Attached is a 86 logo that can be used as the start-up logo for the T7019a head unit. It may also work on other devices,

To install (or at least how I managed to get it to work):

• Extract the toyota86.png.logo file from the attached .zip (do not use the attached .png file, it is here simply so it can be previewed)
• Copy the .png.logo file to the root of a USB stick
• Insert USB stick into head unit
• Open up the secret 'General' settings (password is '123456')
• The logo on the USB card should be available to be selected.

I don't think you need root to perform the instructions above.

Once you have selected a new logo, the USB stick does not appear to be needed anymore.

If later, you go back into the Logo selection screen, the new logo won't be shown so you may lose your custom image if if you switch back to another logo. You can make the new logo one of the permanent selection, by adding it to the /system/etc/logos directory (root required, with /system mounted with r/w access to be able to copy)

! nice!...is there something about "STI" for Subaru?