[F1point4]

Thanks @Pete. I may need to drain mine a little. I filled mine so it leaves one hash untouched cold.

I also found the wrench sizes to be 9/16" to hold the line and 1/2" to loosen the nut. American company, go figure.

Originally Posted by Dezoris

Thanks for posting this, its the only thread of its type.
I used the dip stick hole to fill the oil, I don't think it matters?

Also I almost shit my pants when I broke the screw loose on the stainless line and the oil was pouring out around the fitting and the hole. I thought I broke the line. I assume yours did that too?

Yeah I filled mine using the dipstick and yeah fluid came out from behind the fitting when I got the bolt loose.