|
Pass through sockets are a must for spring changes on this car. Do NOT use an impact gun to blast the topnut off. You CAN, but you WILL damage the seals. A Hex key (6mm I believe) and the pass through socket for the nut and a couple of people to hold stuff and you should be fine. Like I said, I did mine on a driveway on jackstands, then again in a shop with a lift; I'll gladly lend a hand. Plus, this will give me an excuse to come to Phoenix to pick up FRShadow's HIDs. Hopefully you don't do this Saturday (6th), I have a pretty big install to do that day (my secret project).
|