Quote:
Originally Posted by Dezoris
The connector pins on this OBD2 connector are very flimsy. I used the OBD2 MX BT adapter and it stretched out the pins. So when I went to reflash the ECU the port would half work. So, I ordered replacement pins and a different OBD2 connector and re wired it. The stock connector is only sold as a harness and is $800.
So if you are using the stock port be very careful and if you used the obd2 mx it will ruin your port if you take it in and out a few times.
|
where did u buy the parts?
diy?