Quote:
Originally Posted by BlaineWasHere
So much NEGATIVITY in the NorCal OT I figured I'll bring some POSITIVE!
Strano Parts front sway bar is going on the car TODAY! Then test at AutoX this weekend! I anticipate this bar will be much better than all of the name brand offerings for a many reasons. The biggest reason is it was actaully built with FOR the FR-S/BRZ. Most of the other parts manufactures just made a super stiff front bar to match the sorta stiff (but WAY to stiff for GT86) WRX/STi bar they already made to save R&D. IMO almost all of these "off the shelf" set-ups will make the car WAY WAY to stiff. Sways should be used to tune suspension, not "fix" it. Regardless I'll report back!
I also have whiteline camber top mounts, and wheel spacers so I can dial in MORE negative camber and go up to 255/40/17 tires!
|
Nice, are you going 255/40/17 all around or just the rear? Keep us posted on the difference when you switch out to the wider tires etc.