[Splat]

Alrighty, I received my Perrin Oil cooler from Joe Boxer.
This will be a heavy pic loaded run. Starting with bumper removal notes. The 2 bumper removal DIY's are awesome and do that well. Everybody says screwdriver out the pop rivets, well, in pics following I wanted to show that you should always pop the rivet first, pull out the rivet, then the entire rivet piece will come right out. Ones that have a Philips, turn until it pops, then pull it out. Others you pry with tip of flathead till they pop out, then pull it out. This will ensure those rivet holes maintain their integrity for the next few times you do this. So, pics shows type of rivet and what they should look like before you pull all way out, when you put back in later, you put assembly in and then push/pop rivet all way in. Done. After these pics I will start with the oil cooler install.