Quote:
Originally Posted by ag144
I just finished rebuilding my fa20 because of an injector seal that went bad on the direct injector on cylinder 1 and caused it to lean out and melt away the ground electrodee on the spark plug and caused cylinder wall damage.
this seems to be a problem with the direct injectors. when i took it aprt there was nothing left of the seal.
this may become a recall.
here are some pictures of the injector, plug and cylinder
|
Check your coil pack, one member here reports that the coil-pack fails first then the plug then the seal, he said to always replace the coil-pack after a DI seal failure. Good luck.