Front Turn Signal Diode Dynamics Switchback Installation Question
 

Hey guys, I bought the diode dynamics HP24 switchback bulb for my FRS. My question is how to get access to the bulb to swap them out.

Any ideas?

You need to remove the clips in the fender liner. Pull it back and you'll get access to the lights. Just grab and twist the socket and install with the switchbacks. That's all there is to it. Easy mod and it looks great.

I have the greddy front lip so i guess i would need to remove that. I wonder if thhere is a way to access it from the front by removing the plastic insert where the fog lights would be

You might be able to just undo the 3-4 clips in the fender without doing the one below. You just need enough space to fit your hand in. You'll be doing it blind but you can feel it out.