Originally Posted by Spencera15 (Post 2487357)

Hey all first off im new here and happy to be apart of this group i have a question tho i have recently just got me the spyder fog lights for my frs and after looking around i can't find a DIY for the spyder fog lights so my question is do any of you guys know if this harness can be hooked up without using the button it comes with?? For example how can i hook up this harness so it comes on with my DRLS?? If needed as well i can post pictures of the harness, Btw i apologize for being a noob at these wiring questions
�� Thanks everyone in advance :)

Originally Posted by go_a_way1 (Post 2487389)

You should be able to just wire the foglight positive into the positive for the DRL's, and ground it and it will work, however they will only be on when your headlights are off (if you are talking about those DRL's in the headlight) or only be on when you turn on your taillights/ low or high beams (I assume that is what you want?)

Originally Posted by Spencera15 (Post 2487406)

Okay thank you very much for the very quick responses sorry i wasn't to specific my goal is to make it where the fog lights turn on when my other lights on auto turn on so tapping into the side markers would probably be easiest right? Or do you guys have any suggestions to make it easier? Thanks again :)

Originally Posted by NyC Zn6 (Post 2487395)

Yea you can tap into the side markers so they come on with drl and with headlight. That's how i did mine.

Originally Posted by Spencera15 (Post 2487411)

Okay thank you very much! Quick question when you did yours did you take the whole bumper off or did you just go behind the wheel well or under the bumper? Thanks