Plastic clips replacement
 

I stepped on one, and almost stripped another fixing my side marker.

Anyone know the part number or size? I google'd and search so much inconsistent answers.

I think these are it, but comments are sketchy.

[ame]http://smile.amazon.com/Subaru-Push-Type-Retainers-Diameter-46064-AE000/dp/B00KSM98US/ref=sr_1_17?ie=UTF8&qid=1449992121&sr=8-17&keywords=subaru+clips[/ame]

http://smile.amazon.com/Subaru-Engin...DateDescending

i found success by just going to my local subaru dealership and pointing out the actual clips that you wanted. They had a model in the showroom and I took the guy to the car and pointed out the ones I wanted. I had this same problem, after pointing out the parts I wanted the guy there found exactly what I wanted.

Here ya go!

http://www.fteightysix.com/new-produ.../#.Vm0mTRorKHo

Attachment 127137

Some along the fender are like this as well. The one I attached the link to is the one that goes directly behind the side marker. The other three are these. If stripped one fixing your side marker, it's most likely the attached link.


Sent from my iPhone using Tapatalk

80 cents each on SubaruParts.com

http://subaruparts.com/parts/index.c...&siteid=218240

http://subaruparts.com/media/images/.../7/7610095.gif

I just installed my new header yesterday and the amount of fasteners on the aeropan (including 6 of these little bastards) is hilarious. I wrecked almost off of these simple because the grit/sand had made them inoperable.

Total fasteners taken off was 18 I think ... ridiculous.

I just buy those things at auto zone. They were always falling out of the mustang. I have a few missing on my FRS. Also missing on my FRS. Two of those valve stem covers with sensors. Not sure I can get them at auto zone