| thambu19 |
12-15-2015 07:55 PM |
Quote:
Originally Posted by steve99
(Post 2479013)
If you have used incorrect def file to edit it likely written a corrupt rom to ecu.
Use the oft to write bact the Original File to the ecu the one in the top slot.
if it still wont write try this
Switch off ignition
Remove positive battery terminal
With battery disconnected, depress brake pedal to bleed off and redidual power
Replace battery terminal
Flash your original tune to car on first turn on of ignition
Ie plug in oft turn ignition on go to write , wtite original tune without turning ignition off even if oft asks you to.
After that i think you got big problem, contact the oft guys.
|
With the time and effort you are putting into the community you need to start charging people :). Not kidding, I am serious. We understand that you are passionate but you have saved the A$$ of hundreds of folks here and I am sure they would wish to thank you for it.
I totally suggest setting up a donation account. Again not kidding... If others approve this please like/thank the post :) and if you get ten likes/thanks then you setup an account :)
|