foglight surround removal for brz limited
 

Hey guys tried to search but didn't find my answer. Im wondering how to remove the foglight surround, does it simply pop-out by pulling or is it screwed in?

thanks

If I remeber right they pop out but are a b*tch to get out (atleast on the FRS)

so i just tried, but i couldn't even get them to budge. Anyone maybe have a guide to install oem fogs maybe can tell from the instructions if theres screws holding it back...

I have APR brake ducts and I remember putting them in was the biggest pain in the ass and took like 100000000 pounds of pressing to get them in (they are amazingly strong hahaha) but the OEM ones poped out I am like 90% sure you just press them from behind. My car was on a lift when we did this and it was like 2 or 3 years ago

From what i remember (i could be wrong its been a while) but im pretty sure they are screwed into the bumper from the inside. You need to take off the bumper and unscrew then then they come out.

The black plastic just pops off ONLY AFTER removing the 2 10mm nuts from the back of the DRLs. Pull the inner fender to get to those nuts, pull the DRLs, and then pull the tabs a little bit and it'll pop out.

^ Hmmm... How true is this @DSOmegaX ??

True. You can just go through the fender liner. No bumper removal necessary


Sent from my iPhone using Tapatalk