Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 11 of 22 « First 78910 11 1213141521 Last »
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   New England (https://www.ft86club.com/forums/forumdisplay.php?f=14)
-   -   Any New Hampshire people active on here? (https://www.ft86club.com/forums/showthread.php?t=98332)

TheMaummar 03-28-2016 11:05 PM
Quote:
Originally Posted by Fonzi (Post 2600772)
New england dragway is open in epping on friday night. Suppose to 60 degrees out anyone going?
Epping isn't far from me....is it free admission?

BWilky 03-29-2016 09:07 AM
You do have to pay a small fee to race and less to watch. I could not find the price online.

Fonzi 03-29-2016 07:42 PM
Quote:
Originally Posted by TheMaummar (Post 2600848)
Epping isn't far from me....is it free admission?
I believe its $20-30 to race. I fully built my frs since my last run of 12.3 with over 100 more hp trying to hit mid 11's

TheMaummar 03-29-2016 10:26 PM
Quote:
Originally Posted by Fonzi (Post 2602369)
I believe its $20-30 to race. I fully built my frs since my last run of 12.3 with over 100 more hp trying to hit mid 11's
What Mods did you do to your frs?

86life 03-30-2016 12:10 AM
Quote:
Originally Posted by Fonzi (Post 2602369)
I believe its $20-30 to race. I fully built my frs since my last run of 12.3 with over 100 more hp trying to hit mid 11's
Are you in Manchester? If so, do you often park in Queen City near the elementary school? Were you on Calef a few days ago, near the barber shop?

I probably have the wrong guy, but it doesn't hurt to ask.

Vyconis 03-30-2016 12:49 PM
Quote:
Originally Posted by TheMaummar (Post 2598942)
I had no clue this was even a thing. lol
I will have to research it...I just drive the car how it is. I am used to beater cars though so this clutch feels amazing to me stock.
I'm use to cars without the clutch spring. I found it weird to be driving with one because the pedal loses so much feedback that I'm use to. Main reason why so many take it out. I can't yet as I'm still leasing my FR-S and if I decide not to keep it, I don't want to have to try to re-install it, lol!

Fonzi 03-30-2016 11:37 PM
Quote:
Originally Posted by TheMaummar (Post 2602604)
What Mods did you do to your frs?
I did a couple things.

Valenti tail lights.
Alpine 10" sub
Alpine speaker's
Alpine amps
HKS coilovers
Full blown 3" exhuast ( selling a 2.5 magnaflow )
Full blown turbo kit with gtx3076
Pauter rods
JE pistions 9.5 compression
ARP head studs
Piper cams
Ferrea +1mm exhaust, intake valves and valve springs
5 angle valve job
Port and polish
Full blown radiator and fan shroud
Full blown aluminum oil pan
Full blown oil cooler
Full blown intake manifold thats not installed at the moment
Auto mater elite guages - oil pressure - A/F - boost

Pushing 23 psi on pump gas @ 429hp going back in friday for a retune for more power

BWilky 03-31-2016 09:14 AM
Quote:
Originally Posted by Fonzi (Post 2604415)

Pushing 23 psi on pump gas @ 429hp going back in friday for a retune for more power
:confused0068:Holy crap

TheMaummar 03-31-2016 06:17 PM
Quote:
Originally Posted by Fonzi (Post 2604415)
I did a couple things.

Valenti tail lights.
Alpine 10" sub
Alpine speaker's
Alpine amps
HKS coilovers
Full blown 3" exhuast ( selling a 2.5 magnaflow )
Full blown turbo kit with gtx3076
Pauter rods
JE pistions 9.5 compression
ARP head studs
Piper cams
Ferrea +1mm exhaust, intake valves and valve springs
5 angle valve job
Port and polish
Full blown radiator and fan shroud
Full blown aluminum oil pan
Full blown oil cooler
Full blown intake manifold thats not installed at the moment
Auto mater elite guages - oil pressure - A/F - boost

Pushing 23 psi on pump gas @ 429hp going back in friday for a retune for more power
HOLY COW!! That is one fast car man!! lol:bonk::bonk:

TheMaummar 04-10-2016 03:37 PM
Hey everyone! How is it going? Been awhile since I have been on here....anything new happen? Do we have any new owners?

CFC BRZ 04-10-2016 04:31 PM
Well, I just ordered a Nameless Axleback exhaust, Perrin intake tube, and Grimmspeed tower strut bar. Can't wait to add everything on.

Still too bloody cold to give her the first hand wash of the year. The good news is that the opti-coat reduces any worry of having extensive salt exposure.

TheMaummar 04-11-2016 12:06 PM
Quote:
Originally Posted by CFC BRZ (Post 2616979)
Well, I just ordered a Nameless Axleback exhaust, Perrin intake tube, and Grimmspeed tower strut bar. Can't wait to add everything on.

Still too bloody cold to give her the first hand wash of the year. The good news is that the opti-coat reduces any worry of having extensive salt exposure.
Sounds like a good start for some mods!

CFC BRZ 04-11-2016 06:58 PM
Definitely. I'm not trying to go forced induction so I am just tweaking a few things for sound and handling. The inside needs a few more small details and I'll be content!

racing_reject_001 04-16-2016 07:20 PM
been a while sorry guys hows everyone been? hope everyone has their twins out !


All times are GMT -4. The time now is 03:09 AM.
Page 11 of 22 « First 78910 11 1213141521 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.