Ecutek; where to find Ethanol percentage w/ flexfuel
 

I was under the impression that the percentage value would be displayed where is says "Custom Map P, " but it is showing 0.00

When I tuned, the tuner said that he wasn't seeing any readings from the flex fuel at first. We restarted the car and reconnected all the clips a few times, and it randomly started working. I am running the delicious flex fuel kit. I also cannot connect to it through the bluetooth on my phone, so I'm thinking it might not be functioning. Is the custom map P correct, or is it a different spot?

Ecutek; where to find Ethanol percentage w/ flexfuel
 

I have the DT Flex Fuel Kit and Flash n Go tune from them as well. The ethanol content was found in Custom map P Results for my DT tune.

You need to check "Custom Map P Result". If it is 0.00 give us a call on Monday as we can walk through a couple steps and make sure everything is installed correctly.

Cheers,
William Knose
Delicious Tuning

sorry, I hadn't seen your reply until just now. I'll call Thursday afternoon. Custom Map P is showing 0.00
For the record, I was able to connect with my Android through the bluetooth app. The result was a little puzzling though. I tuned for flex fuel in the middle of October this year. At the time of tuning, I had filled the tank with 10gallons of pump E85. The tuner said that the kit was showing E77, which sounds about right. The car hasn't been running quite right, so I have been doing short trips around town while data logging to diagnose. Since I haven't been driving it much, I am still on the same tank of fuel and have not added any. The Delicious Bluetooth app says my ethanol content is at 43%. I know the percentage will decrease over time, but it seems a bit drastic to drop from 77% to 43% in about 6 weeks.