| markmatley |
06-27-2012 01:53 AM |
Quote:
Originally Posted by Nate219BRZ
(Post 278302)
So basically i have to order the opti from europe and have someone apply it?
|
I am going to try it myself for certain areas like the door jamb area, inside the fuel door, perhaps around the underside of the car.
Quote:
Originally Posted by DaveyG
(Post 280352)
No. A few places in the states sell it and you can do it yourself, its easy.
|
If you do it yourself, make sure to do small sections at a time. You can directly apply the opticoat to the applicator sponge included, or you can cover the applicator with a nitrile glove (that way it doesn't soak up the product so much). Apply onto a small section, move the applicator around in one direction, then in a perpendicular . So if you start with left to right, then finish up with up and down. Once the small area has been coated, I would get a clean microfiber, and gently wipe in the directions you applied the product. Don't put pressure, just let the microfiber glide. This helps to pick up any product that might cause high spots. Let it cure a bit and move on to the next area. Good luck! |
