tein

BUY BC'S OR POWERED BY MAX, i will say you wont be happier with any other coil but these for that price range

Great price on those Street Flex, Mike. That price should make the choice a no-brainer for OP.

Any substantiation to that claim?

....lol BC coilovers...

2nd, 3rd and 4th on Street Flex. it feels aggressive but not too harsh on street.

Find a local meet near your house. Attend the meet. Ask some friendly locals what suspension they are "on" and ask for a ride( not a drive as most wont let you) but a ride.

Make sure they take a road with real world bumps. Exit ramps and on ramps tend to be smooth. Smooth surfaces are NOT a challenge, bumpy surfaces are.

Want to know which set up you will actually want to "live with" beyond the "happy to have these on my car after I spent a grand stage" is over ?
Ride on bumpy surfaces,.... as for most ( including California ) thats what you live with on the daily drive/commute and thats where you will formulate your real opinion of the shocks you want.

* Also ask owner if they are adjusted soft or firm etc.

Thats my .02 worth.

Myles Williams
RCE

Wonderful advise .. pitty that won't work in some smaller countries where such cars are still rarity and not much of a local communities around them. But then again there are lot of other things/vendors/shops/services too that are only there in bigger countries and i'm missing locally. Regarding particularly coilovers the best i can do when doing choice is to find people with clue (like RCE/CSG guys) that i may trust and read their reviews/advises :). No option of trying it out in other cars, and i highly doubt that trying 'similar brand/model' in other car models will tell well enough how it will do in these ..

To some extent though, going for a ride in a BMW 3 series (for example) with Bilstein PSS10 will give you a little bit of an idea of what your car would be like with Bilstein PSS10. Definitely not exactly the same, but yes a similar "feel" as Bilstein for example has a pretty consistent tuning philosophy. It's better than nothing!

Some of us can hop in a car and guess the brand of shock on a car just from a ride along. ;)

- Andrew

If you're looking for something close to stock...you might as well go with springs and save the extra bucks on something else. I don't see the point in spending around $1k on coilovers if you're only lowering it about an 1". I'm getting my RCE yellows installed tmr just to close the wheel gap a bit. Planning to stick a front lip and side skirts too so that'll lose another inch of road clearance as well.

That's what i thought when i first modded my car. I went with swift springs for a 1" drop and the stock shocks. after driving around for a while, i was dissatisfied with the rear end 'wallow' and bounce when i hit dips in a curve. i swapped them out to tein flex Zs and they made a huge difference. the car now feels way more planted and stable yet the ride is softer (when i choose it to be). small bumps are absorbed much better which translates to less bounce and road noise.

the adjustable ride quality is also a plus. i have different settings for LA street, freeway and canyon driving - something i couldn't do on just lowering springs.

if you just want it lowered for looks, springs are fine. but if you also want to retain ride quality and performance, then i'd go with coilovers. if i knew what i know now, i'd have gone with coilovers from the start and skipped the lowering springs.

I have RCE T2, even in the track settings, I feel it rides very close to stock. When I am sad and have long periods of time between track days, I will back them off 2-3 clicks and the ride is superb.

I found this surprisingly funny