Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   Offset? (https://www.ft86club.com/forums/showthread.php?t=97268)

bleox 11-06-2015 01:52 AM

Offset?
 
So I'm go with xxr 530 for now my question is what offset is optimal for the brz ive been looking around can't find it. So my options are 35 and 25 which would be best thanks in advance !

Sent from my Nexus 6 using Tapatalk

jawn 11-06-2015 01:56 AM

http://www.ft86club.com/forums/showthread.php?t=7535
http://www.ft86club.com/forums/showthread.php?t=15007

Bamsterman 11-06-2015 09:43 AM

I couldn't find anything either

http://www.ft86club.com/forums/showthread.php?t=18661

bleox 11-06-2015 09:45 AM

Lol funny thing is I found that thread through Google... the search in the app I use for forum didn't find anything under xxr 530

Sent from my Nexus 6 using Tapatalk

AlexWood 11-06-2015 11:16 AM

Do you have a diameter and width picked out? That would give you a start as to where you should be offset wise


Sent from my iPhone using Tapatalk

jawn 11-06-2015 11:20 AM

Quote:

Originally Posted by DarrenDriven (Post 236668)
Code:

WHEEL  |-- STOCK HEIGHT --|  |-- LOWERED 1" --|
WIDTH      FRONT    REAR      FRONT    REAR
7.0        +25      +18        +23      +13
7.5        +31      +24        +29      +19
8.0        +38      +31        +36      +26
8.5        +44      +37        +42      +32
9.0        +50      +43        +48      +38
9.5        +57      +50        +55      +45
10.0                  +56                  +51


WHEN LOWERED 1" YOU WILL NEED TO REDUCE THE FRONT OFFSET
BY 2MM AND THE REAR OFFSET BY 5MM FOR PERFECT FLUSHNESS
 (FLUSH = TOP OF WHEEL FLUSH WITH TOP CENTER OF WHEEL OPENING)

DECREASING THE OFFSET NUMBER PUSHES THE WHEELS OUT AND
INCREASING THE OFFSET SUCKS THE WHEELS IN.


Unless if you're running some serious camber and are lowered, you probably don't want +25. But there's no way to say what is the "best fit" definitively without knowing which width you're looking at.

bleox 11-06-2015 11:24 AM

Quote:

Originally Posted by jawn (Post 2443769)
Unless if you're running some serious camber and are lowered, you probably don't want +25. But there's no way to say what is the "best fit" definitively without knowing which width you're looking at.

8.25 or 9.75 @jawn... And that chart very easy to understand but not on Tapatalk.. I checked it out on my browser and I felt dumb of how easy it was to understand

Sent from my Nexus 6 using Tapatalk


All times are GMT -4. The time now is 11:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.