turbo troubleshoot.
 

Alright so the problem i am having right now is after installing a fbm base kit and flashing with a base map from speedfactory Im throwing two CEL codes. We pulled p2122 and p2127 which is related to the throttle pedal position sensor switch. Not sure why this is coming up as i didnt touch any of the accelerator pedal wiring.

The first time the car was fired up it was not idling well and i let the car idle for a couple mins thinking it would sort itself out and then i noticed the cel light was on. I tried driving it and there was alot of hesistation during acceleration. The car also went into limp mode before the turbo would fully spool up and the stability light came on as well. I have no idea whats causing the problem. Im tentaively ruling that the theres something wrong with the tune?

Mods on the car are:
Fbm base kit
550cc injectors
270lph fuel pump
3 bar omni map sensor
Tuned for 91 oct

Cheers.