Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   AUSTRALIA (https://www.ft86club.com/forums/forumdisplay.php?f=20)
-   -   WORK Emotion CR Kiwami (https://www.ft86club.com/forums/showthread.php?t=9631)

Kenno 06-23-2012 11:05 PM
WORK Emotion CR Kiwami
 
I will be ringing WORK Wheels Australia tomorrow about pricing regarding some 18x8.5 +38 and 18x9.5 +38 Emotion CR Kiwami in matt black.

Will post the quote here as there is no pricing on their website, and these size/offset rims will be a 'custom PCD'. I'll also let you know if they will offer any sort of discount for a group buy.

http://www.work-wheels.com.au/getima...magesize=large
http://www.workwheelsusa.com/media/w...IWAMI_2011.jpg
https://m.ak.fbcdn.net/a6.sphotos.ak...39744172_o.jpg
https://m.ak.fbcdn.net/a2.sphotos.ak...71522880_o.jpg

DriftEightSix 06-23-2012 11:09 PM
Good luck.

Most likely to cost a mint :D

Any reason why you are going to for staggered?

Just for fitment? or other reasons?

Kenno 06-23-2012 11:11 PM
Quote:
Originally Posted by DriftEightSix (Post 275146)
Good luck.

Most likely to cost a mint :D

Any reason why you are going to for staggered?

Just for fitment? or other reasons?
Mainly for fitment. I was originally going to get matt black 18x8 +45 Advan RG-D's all round, but then saw the post in the wheels/suspension thread and now prefer the look and fitment of these. If the Kiwami's turn out to be a ridiculously expensive amount, I will go back to the Advan RG-D's.

Toy86 06-23-2012 11:13 PM
Quote:
Originally Posted by Kenno (Post 275138)
I will be ringing WORK Wheels Australia tomorrow about pricing regarding some 18x8.5 +38 and 18x9.5 +38 Emotion CR Kiwami in matt black.

Will post the quote here as there is no pricing on their website, and these size/offset rims will be a 'custom PCD'. I'll also let you know if they will offer any sort of discount for a group buy.
These look awesome - Subscribed, Very interested

JiB 06-23-2012 11:17 PM
yeah, im a big fan of those wheels too. i'd prefer 17's tho

sirus 06-23-2012 11:53 PM
Is that a BRZ with Matte Bronze??

I might be interested... ;)

Bounce 06-24-2012 12:14 AM
Quote:
Originally Posted by sirus (Post 275232)
Is that a BRZ with Matte Bronze??

I might be interested... ;)
That's matte black =/

blags 06-24-2012 12:27 AM
These will be cheaper then Advan's, if you want a decent price from a company in Aus, try JDM concept, will be about 1900-2000

Nardi330 06-24-2012 12:33 AM
Yes JDM concept would be a good source. Shipping from Syd to Bne is around $100 for a set (need confirm). But i was told u have to run coilovers to fit this size.

Btw the wheels on the white BRZ above is matte bronze.

I'm in for group buy!!

EDIT: I think 18x8.5+38 on 5x100 is custom size too and costs 6000 yen extra each usually. Need to confirm with seller.

ToF 06-24-2012 12:48 AM
These were going to be my wheels too. If any one gets them, plpease post pics of fitment and your wheel specs/suspension (coilovers/lowered springs). Thanks.

Bounce 06-24-2012 01:57 AM
http://www.jdmconcept.com.au/part/wo...et/86-zn6-2012

Quote:
17 X 7.0 - was $430, now $370 per wheel [4-100, 4-114.3, 5-100, 5-114.3 / +32 +42 +47]
17 X 8.0 - was $450, now $380 per wheel [4-100, 4-114.3, 5-100, 5-114.3 / +32 +42 +47]
17 X 9.0 - was $460, now $390 per wheel [5-100, 5-114.3 / +17, +28, +38]
18 X 7.5 - was $470, now $420 per wheel [4-100, 4-114.3, 5-100, 5-114.3 / +35 +42 +48]
18 X 8.5 - was $500, now $440 per wheel [5-100, 5-114.3 +30, +32, +37, +38, +43]
18 X 9.5 - was $520, now $460 per wheel [5-100, 5-114.3 +12, +20, +30, +38]

Quote:
Colour available:
Bronze [MHG] - Standard
Gunmetal [MGM] - Standard
White [WHT] - Standard
Work Metal Bright [WMB] - DISCONTINUED - Premium [1]

Kenno 06-24-2012 02:15 AM
Yeah, I know about JDM Concept, but I figure the best price would come from the official manufacturer/importer, ie Work Wheels Australia.

Plus, the JDM Concept site doesn't say what the pricing is for the custom PCD that I'll require. Will be interesting to compare the prices between them anyway.

Nardi330 06-24-2012 02:22 AM
Quote:
Originally Posted by Bounce (Post 275416)
That's CR Kai and not CR Kiwami.

Nardi330 06-24-2012 02:23 AM
Quote:
Originally Posted by Kenno (Post 275434)
Yeah, I know about JDM Concept, but I figure the best price would come from the official manufacturer/importer, ie Work Wheels Australia.

Plus, the JDM Concept site doesn't say what the pricing is for the custom PCD that I'll require. Will be interesting to compare the prices between them anyway.
JDM Concept is an official distributor too

http://www.work-wheels.co.jp/overseas/detailed.html


All times are GMT -4. The time now is 05:09 PM.
Page 1 of 4 1 234
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.