Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - FS:Vortech Supercharger, Catch Cans, and ECUTek cable/dongle

V3 Vortech Supercharger w/3.12 and stock pulley

Was on my car for 4k miles, charger was rebuilt less than 1k miles ago in Nov. Cost me $500. Reason for selling, trading the BRZ in.

What's included:
- V3 Supercharger and all hardware (3.48 stock pulley and upgraded 3.12 installed currently)
- upgraded to T-Bolt clamps where it makes sense
- 4 bar omni
- MAF extension cable
- Belt included
- All parts labeled and screws/hardware seperated. You won't have to dig around like i did to know what screws go with what bracket, etc. This will save you at least a couple hrs on install!
- I will throw in my washer fluid filler neck so you don't have to modify yours.
- 2 new bottles of Vortech V3 oil.

Full Disclosure:
- Charger was rebuilt due to one of the air box brackets coming lose in the air box which scratched a couple of the impeller wheel fins. I did not notice any issues but I sent the charger to 928 Motorsports in WI to check it out. One bearing and one seal needed replacing. Not sure if this was due to the bracket or just was bad. Will never know. 928 Motorosports did not replace the wheel since it can only be done at Vortech. My understanding this is about $300-500. I never replaced it and since Nov 2014 the supercharger has been RUNNING WITH NO ISSUES. My plan was to upgrade to V2 at some point anyway, so I just left the charger as is. To each his own, I just want to be upfront.

- There are some scrapes on the intake pipes due to assemble and disassemble.

- There are couple of brackets that hold the intake pipes more securely to the body that will not be included. I lost these and just made my own. It has nothing to do with the supercharger or anything that is significant in my eyes. I will throw in a couple extra clamps if needed.

- Intercooler bracket to afix to the bumper uses 4 screws total. These are machine screws and when I installed it I only used 1 on each side, hence I'm only including 2. The install works fine since there's metal bracket holding it up from the bottom. You can go to home depot and buy new ones if needed. Not an issue. just want to call it out.

- When I was removing the 4bar omni I cracked off the plastic insert that connects to the manifold. There's no functionality to this peice, it just physically holds it in place. i will include 4bar, and the buyer can decide to buy a new one or just afix it another way. Electrically the part is fine. It's a $100 part which is not included in the kit.

Price:
$3200 + Shipping. Shipping will be $200-$250 via UPS. It's not cheap. Local sale and pickup have priority over shipping.

http://i1292.photobucket.com/albums/...psx7kdia2k.jpg

http://i1292.photobucket.com/albums/...psl1jaai5w.jpg

http://i1292.photobucket.com/albums/...ps1rnoqh8p.jpg

http://i1292.photobucket.com/albums/...psweykpyvt.jpg

http://i1292.photobucket.com/albums/...pskurfrtnx.jpg

http://i1292.photobucket.com/albums/...psxpnicz8x.jpg

Other Items for sale.

http://i1292.photobucket.com/albums/...psqsky5ufq.jpg

http://i1292.photobucket.com/albums/...psgwtelaeh.jpg

Saikou Dual Catch Cans - SOLD
- No issues, used for 3k miles. Does not include hoses, as buying new does not either.

Price:
$125 + Shipping

ECUTek Cable and Dongle - SOLD
- No issues. Does not include license. You will have to buy a license in order to flash your car.

Price:
$250 + Shipping

I will post my RSR Superdown springs, OEM Painted lights, Grimmspeed front plate, and middle armrest in their respective forums.

- Will not ship to Canada, Hawaii, or internationally.
- Paypal payment only to sissupr at G M A I L dot COM

Questions, offers, please PM me or email me at sissupr at G M A I L dot COM directly!

Tx. Joe