FR-S Wiring Detail
 

Hello all,

Just wanted to contribute to the site, as it seems to be quite a growing source for info. I've attached a wiring detail sheet for those interested in taking on any challenges with A/V and security in their vehicles.

DISCLAIMER: I am not responsible for any damage done to you or your property through the use of this document! I have not validated any of these wires personally, but will attempt to do so relatively soon.

I'm scheduled to get my car the first week of July, and having been a mobile electronics installer for many years, I'll try to assist any with questions and issues through here. (Once I've spent my due diligence in and under the dash) :drool:

Reserving for pics..

Thanks!

DISCLAIMER - I am not responsible for anything occuring to your vehicle, after I use this wiring diagram, and the magic smoke leaves the system as the trons run for the hills.

:happy0180:

That's an excellent reference. Thank you very much :happy0180:

Thanks! Now I have something to help me search for the wires to do my remote start and push-button start!

Compustar has done my car already and Idatalink will have the firmware finished very soon to do everything but PTS. I'm still looking for a PTS BRZ in the northwest for them to get that info. So if anyone deals with a Compustar dealer they have all the wiring and bypass figured out as well.

Just an FYI, I've found some wrong wiring codes on that provided page. For example, the door lock triggers are wrong, as is the tach signal. Just a heads up for anyone planning on using it.

It also has wrong color for Radio Ignition (10-pin plug pin 3) -- says it's black/blue (same as pin 7 ground).