Help with head unit problem
 

So I was attempting to install the in dash switch for aftermarket fog lights and I was trying to find a 12v accessory wire using a volt meter. I disconnected several of the harnesses under the driver kick panel during this process but I replaced them all.

Now my head unit is not turning on at all. I tested the orange wire on the 10-pin harness in the back of the headunit and it's not getting any power and I believe it should be getting 12v. I checked the radio fuse in the fusebox and it's fine. Everything else is working fine, except the headunit.

Does anyone know which wires/harnesses under the driver kick panel give power to the headunit? Any help is appreciated.