Tail light wiring question
 

I recently ordered the BRZ tail as turn kit from Diode Dynamics for my 2015 Subaru Legacy, which uses the same connector as the BRZ. Based on pictures/info on this and other BRZ/FRS forums, the pin layout of the connector is different than that of my Legacy. If someone could tell me the pin layout of the BRZ I would greatly appreciate it!!
Here's the connector:
http://i.imgur.com/LzOcYM7.jpg?1
The pin layout on the Legacy is as follows:
TURN | GROUND
------------------
BRAKE | TAIL

I've searched and searched, tried to read wiring diagrams, but can't find a thing. I emailed Diode Dynamics and they have no clue. I read through multiple forum posts about converting the lower reflector into a 4th tail light but still nothing.

All I need to know is while looking at the connector with the tab on top, which wire is in which spot?

Thanks in advance!