Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

It's time for a bit of Spring cleaning. I have a few quality parts that have been very well cared for, and are in need of a good home. Most have minor and gentle use, or no use at all, and all of them are in very good to like-new condition.

------------------------------------------------------------------------------

Apexi Power Intake Panel Filter - $10 // AVAILABLE

http://i.imgur.com/4GgPKCA.jpg?1

> Condition - USED, original box included (approx 14,000 mi - can be cleaned with canned air, and should be good for over 20,000 mi. This one is still in good condition, so I would expect it to be good for at least that).

> For More Information - http://www.apexi-usa.com/store/power...cion-fr-s.html

> For Additional Images of Actual Item - http://imgur.com/a/ACcae

> Description, Reason for Selling - this is a fantastic panel "drop-in" filter for the stock intake, and the best available (in my opinion). Placebo aside, I felt a small, but notable improvement in the throttle response when I installed this. I am selling it because I removed my stock intake, and replaced it with the GrimmSpeed intake.

Grazio & Co Matte Black EURO GT86 Emblem, Opti-Coated - $105 // AVAILABLE

http://i.imgur.com/7f5x8R9.jpg

> Condition - NEW, in original box (was removed for inspection, and to have opti-coated.) I paid approx $133 to have this emblem made-to-order (three weeks waiting time) and shipped from Japan, and had it opti-coated (approx $25 value.)

> For More Information - https://www.japanparts.com/parts/detail/46255

> For Additional Images of Actual Item - http://imgur.com/a/8G2ls

> Description, Reason for Selling - I love this emblem, and I had intended to use it on the trunk to cover the holes left by removing the OEM Scion emblem. I have the fender-garnish emblem made by this same Japanese company (also in matte black) that I have had installed for two years now; the quality it top-notch, and with the opti-coating will not fade from exposure to the elements and UV.

There was a small defect in the paint (in my opinion - see images) that left a faint, "ghosted" ring in the middle of the "86" portion of the emblem (see images). My boyfriend liked this and considered it serendipitous, but I was not comfortable with this being the perfectionist that I am, so up for sale it goes (please note - the lighting in the images provided highlights the defect rather egregiously, and not realistically - especially once installed (where the emblem will be vertical, and not exposed to the scrutiny of direct-lighting.))

Grimmspeed Cold Air Intake (w / Black Tube Coloring) with Additional Dry Filter Option - $300 // AVAILABLE

http://i.imgur.com/OT9fHuB.jpg

> Condition - USED (very lightly - approx 250 mi, or less.) The current cost of this item with the addition of the dry filter would be approx $389 before shipping, for reference. This intake includes all parts included with a new purchase (including an un-used, un-opened oiled filter,) and the dry filter. I have one caveat to that - I have included the Dynosty sound tube-delete plug instead of the GrimmSpeed one; the Dynosty one is the same thing (a little rubber plug that fits into the hole in the firewall, and can be purchased at a hardwear store for under a dollar), but it is new and un-used (I got it when I purchased their sound tube delete kit after re-installing my stock intake.) I didn't see a point in going through the hassle of un-installing the GrimmSpeed one, only to re-install the Dynosty one when I could just throw in this brand new one with the rest of the kit.

I took a great amount of time and care in installing the gasket that is included with the kit which must be fitted around the entrance to the intake - including cutting it to the perfect length after having GrimmSpeed send me a new, longer one as the initial one I received was cut a bit too short, and was rigid from age. Therefore, that is one less (tedious) step for the installation.

> For More Information - http://www.grimmspeed.com/grimmspeed...-2013-brz-frs/

> For Additional Images of Actual Item - http://imgur.com/a/SvXrR (including installed-images, so you can get a better idea of what it will look like).

> Description, Reason for Selling - this intake is (in my opinion) the best intake available in terms of gains (both tuned or un-tuned), and safety. GrimmSpeed spent over a year developing this intake, and documenting their progress along the way. Moreover, they have backed this product with data, and dyno testing to prove it (see thread - http://www.ft86club.com/forums/showthread.php?t=78902)

This intake induced a bit more "grunt" to the sound of the engine under throttle, and the butt-dyno felt satisfied with a notable increase in throttle response. The intake will also delete the sound tube (a plug for the firewall is provided with the kit), and therefore clean up the engine bay.

I purchased the dry filter (newly-released) for the intake along with the intake itself, which comes standard with an oiled-filter. Therefore, you will have both the dry filter ($59.99 value, and does not need to be replaced or re-oiled) and a brand-new, unopened oiled filter (this can be helpful if you need to drive your car while waiting for the dry filter to dry after washing it, or vice versa if you choose to utilize the oiled filter and need to replace it).

I removed the intake as a personal choice, not because I was disappointed with it; I've decided that I would simply like to keep the components of the engine bay stock.

Modellista Tail Light Covers (Paint Code D4S - CBS, Raven) - Opti-Coated - $125 // AVAILABLE

http://i.imgur.com/1GDjOOI.jpg

> Condition - USED (approx 8,000 mi). The tape will need to be replaced (I can provide you with a roll of 3M outdoor-grade, double-sided tape for free), or you can adhere these in another manner if you prefer. These cost me approx $250 to have painted and shipped from Japan, and another $50 to have opti-coated.

These are in great condition, there is only one very small, very faint scratch on one that would probably go unnoticed, but I'm going to point it out because that is fair (see image here - http://imgur.com/a/aAOGC#6 (note; the other "stuff" on the tail light cover in this image is just a bit of dust and dog hair.))

> For More Information - https://www.vividracing.com/catalog/...FReUfgodkncLuw

> For Additional Images of Actual Item - http://imgur.com/a/aAOGC#0 (including installed-images, so you can get a better idea of what they will look like).

> Description, Reason For Selling - I really liked these tail light covers, especially from a profile, or front-side view of the car (where the entire side of the tail light just looked black). They are painted in D4S black, so they will match with any body color (I preferred this to having them paint-matched to asphalt.) I initially got these to hide all of the pollen that got stuck in the border of my tail light housing.

These are a rare piece to see outside of Japan due to the part being rather expensive for what it is, so I'd like to think that I am offering a great price for these considering their condition, and that they have been protected with opti-coat (will not fade due to UV, much higher scratch resistance due to a harder, thicker clear coating).

These are currently selling for $265 unpainted, and before shipping cost have been applied.

I removed them because I had my tail lights replaced under warranty for a defect on the inside of the housing.

OEM Wheels and Tires, Opti-Coated - $600 // AVAILABLE

http://i.imgur.com/g8zU8ts.jpg

> Condition - USED, TPMS not included (approx 18,000 mi). The tires (Michelin Primacy) are in good condition, with even wear, were never tracked, and rotated on-schedule according to the appropriate maintenance - they should have plenty of tread life left of their 35,000 mi warranty from Michelin. The wheels were opti-coated less than two months after the car was purchased. They have normal wear-and-tear from the road (a couple of extremely small, unnoticeable chips here and there from road debris). These were removed less than a month ago, and I have cleaned them thoroughly prior to storing them.

For reference on the value of the opti-coating, my new wheel set cost me approx $225 to have coated.

The only damage is a truly minor bit of curb-rash on one of the wheels (here is an extreme close-up - http://i.imgur.com/nJlTnsK.jpg) that can't be seen from farther than two-feet at wheel-level (here is an image of the same wheel from less than two feet back, still at wheel-level - http://i.imgur.com/mfjcEfo.jpg)

> For More Information - not an aftermarket product and therefore additional information likely isn't needed; however, for those that might need clarification, the wheels are 17 x 7 + 48, with 215 / 45 / 17 tires.

> For Additional Images of Actual Item - http://imgur.com/a/y9IAi (includes images of all wheels, not just a single one.)

> Description, Reason for Selling - I finally got aftermarket wheels for my car after being undecided for two years, and another four months of waiting for the new wheels to arrive. The OEM wheels are good wheels with a nice design that will look especially catching on a vehicle other than the BRZ, FR-S - these are still in very good condition and opti-coated, so I would like for them to go to a good home rather than sitting in an attic until the end of time as I do not plan on ever putting them back on my car, for any reason.

The OEM "Scion" center caps are included (soon to be discontinued?), and I can throw in the green OEM valve-stem caps if desired, in addition to 16 of the OEM lug nuts (I need to keep 5 of them in the event of needing to utilize the spare tire), which will be perfect with the addition of any suitable set of wheel locks.

------------------------------------------------------------------------------

If you live within the greater Portland, Beaverton, or Vancouver area I can deliver the part(s) to you (including the wheels.) I would prefer cash, but am also willing to go through PayPal with the request that the buyer covers the transaction fees if you (understandably) don't feel comfortable gifting the money.

I can ship all of the items (minus the OEM wheels) at the buyer's expense.

All of these items are of great quality and in very-good or like-new condition. I have already reduced prices beyond that of their actual value to make them more appealing, and because I would like to see these parts utilized rather than sitting in storage. That being said, if you do feel that a price I am requesting isn't fair and have a compelling counter-offer, no reasonable offer will be declined; with that, please respect that the pricing is with the intent that the item(s) will be utilized, and not re-sold for a higher value - thank you!

Please PM me if you're interested in any of these item, or if you require additional information and images of anything.

TLDR; plz help fund my coilovers and buy my awesome stuff :thanks: