Pop clip sizes?
 

Hi Guys,

I replaced my headlights and sidemarkers to make them more "JDM" as the people say now :lol: But I found that the philips screw type pop clips were a bitch to remove and install without breaking because they were seated in so tight and ended up breaking like 3 or 4 of them. I would like to know if anyone knows the size of them? Because I would like to replace them with ones that simpler and easier to remove with my pop clip tool like this type: [ame="http://www.amazon.com/GOOACC-Nylon-Fastener-Rivet-Clips/dp/B008427D88/ref=pd_sbs_263_2?&ie=UTF8&refRID=0H5V3RPYSDT6M1Y3T ZV1"]Amazon.com: GOOACC Nylon Fastener Rivet Clips, 8mm - 40-Pieces: Automotive[/ame]

So a size for the ones on the headlights, wheel well liners, and the undertray of the front bumper would be most appreciated

Personally, I'd just go to the dealership. I asked my salesman, he said give me a second and came out with a handful of them for me. Way more than I needed so I have a bunch of extras for just in case. It's free and will only cost you a bit of your time.

@Maximal, about a buck a piece plus shipping.

Figured out the size after some digging its basically for the fender liner which has an 8mm hole so any pop clip that fits that size will work

Sent from my A0001 using Tapatalk

I think the pop rivets for the undertray of the front bumper is 10mm? I remember the pop rivets were slightly bigger. Everything else is pretty much 8mm. Just measure the diameter of the hole and that's the size that you'll need if you're unsure.

Answered this a few weeks ago, here's a re-post. Our car has 3 sizes. They're cheap so buy spares of all 3, you'll probably need them at one time or another.

http://www.ft86club.com/forums/showp...62&postcount=7

Yup, I found them I really just wanted them all to be pop clips simply for future ease of install if I have to take the bumper off again.

Sent from my A0001 using Tapatalk

@DAEMANO Do you know what size are the ones that are under the trunk carpet? Which kept the tools?

I'll check when I get home.

Asked part shop at the dealer and It seems like this one.
Part#95022AC040ND

http://parts.subaru.com/p/Subaru_201...22AC040ML.html

Just posted an update to my own thread about this for anyone interested in replacement clips! LINK

Tip:
If you can't find them at Toyota or have to pay shipping, go to Subaru. Half the price and they had stock so I didn't have to wait a week for an order.