Which shop can zero the steering angle sensor and yaw sensors after alignment?
 

Which shop in the GTA can zero the steering angle sensor and yaw sensors after alignment other than the dealer? I guess the shop would need access to Techstream.

Based on the new OFT logging, I think you might be able to use the sensors to some decent accuracy. Haven't tested it yet

Sent from my A0001 using Tapatalk

I found a shop this morning that has Toyota Techstream which can align the car with the computer hooked up to zero the sensors (basically the car computer is turned on while on the Hunter rack) Laidlaw Auto Service I spoke with the Toyota master tech.

Newer Toyota cars are very German like.

Sent from my Nexus 5 using Tapatalk

I must be missing something here....but why would the sensors need to be reset? wouldn't an alignment bring the wheels back into alignment with the sensors?

Chris at Clarington Hynudai should be able to as well, he was able to zero the steering angle sensor on my bmw. Their system is barely a year old so should be no issue.

Anyone with a 19mm and 14mm wrench and a jack can do it.