rskybz
 

Aloha

Always wanted to be able to share the build, will do my best to update and help others who need help with this chassis. Just a simple daily driver build aiming to be as clean as possible with oem+ parts, jdm parts and Japan/ Shakotan influence. Enjoy.


Update 09/ 2019

https://live.staticflickr.com/65535/...acddcaa0_c.jpg

https://live.staticflickr.com/65535/...f3600dea_c.jpg

https://live.staticflickr.com/65535/...22076719_c.jpg

https://live.staticflickr.com/65535/...242874b7_c.jpg

https://live.staticflickr.com/942/28...a58feb22_c.jpg

Engine:

- ARC Intake Box
- ARC Oil Catch Can
- Blitz Inlet Pipe
- Perrin Radiator Hoses
- OpenFlash UEL catless headers
- Berk Front pipe
- MXP Catback Exhaust w/ Titanium Tips
- PasswordJDM engine cover
- PasswordJDM fuse box cover
- APR Cooling Plate
- HKS oil cap
- Open Flash Stage 2 UEL Tune

Exterior:

- FRS Front Bumper
- FRS Release Series 2.0 Front lip
- Innovated Dynamics brake ducts
- Legsport Duckbill
- Smoked side markers
- TOMS usdm taillights
- OEM TRD Fender Garnish
- OEM Toyota rain guards
- OEM Toyota Emblems

Suspension:

- BC BR Extreme Low Coilovers 22k/24k
- RACERX FLCA
- RACERX RUCA
- PBM LCA
- Voodoo13 Toe Arms
- ONIMADE Camber Plates
- Slotted struts
- Carbing Titanium Strut Bar
- Carbing aluminum chassis brace

Brakes:

- Z32 30mm Aluminum Calipers
- ISR S13 to Z32 braided lines
- Legacy GT 317mm Brake Rotors
- Project MU Z32 NS400 Street Pads

Wheels:

- Work Meister S1R Custom spec 18x10 +6/+0 F/R (Sold as of August 2019)
- Federal 595SS 215/40/18
- Volk Formula Lugnuts

- NEW as of August 2019... Nissan Skyline R33 GTR OEM Wheels
- Stock Michelin Primacys

Interior:

- Nardi Midcorn 330mm
- TFWorks Drift Button
- Works Bell Hub
- Dmax Floor Mats
- Bride ZETA lll Type L bucket seat
- Bride FG rails
- Lathewerks Titanium Shift Knob
- OEM Dashboard Cover
- Carbon dash overlay
- Cusco C Pillar Bar
- ARC Shift Plate

Sweet ride! Can't wait to see it on some aggressive wheels. Any plans?

- Renato

Wheels have been set on the side for now because next on my list is exhaust & lower control arms, But I do have a few wheels in mind.

It's been awhile since I've updated the thread. But alot has changed since the last time i've posted, so this'll be an info/ pic dump.

Current mods~
Performance:
- Blitz Drop In Air fliter
- Nameless Track Pipe (awaiting install)

Suspension:
- Poweredbymax Lower Control Arms *NEW
- BC Racing Extreme Drop 8k/8k spring rate

Exterior/ Cosmetic
- TRD wing, color matched WRB
- STI front lip
- 20mm Front Spacers
- 30mm Rear H&R Spacers
- APR GT Spec Mirrors (courtesy of EatMyHam)
- Grimmspeed License Plate Relocator

Plans for this car, haven't really changed..

https://www.flickr.com/photos/135834...posted-public/

https://www.flickr.com/photos/135834...posted-public/

https://www.flickr.com/photos/135834...posted-public/

https://www.flickr.com/photos/135834...posted-public/

https://www.flickr.com/photos/135834...posted-public/

Thanks for the wallpaper ;)

Haha you're welcome, wouldn't think this thing is even worthy of that.

It's my favorite look on the twins, no kit, low and stockies, the spacers are just the icing on the cake ;) Less is more for me ....

Update as of November 3, 2015.

Not much has changed as money is an issue, building it has been a joy and driving it has been something else (yes I DD it at this height with no issues other than driveways). Love it and I still continue to fall in love with this car.

New parts as of today:
- Custom 4" Blast pipe muffler delete (will be changing it to a dual tip single exit blast pipe setup)
- Chargespeed Rear Spats
- Work Wheel Lugs
- PBM Lower control arms
- Berk Catless Test Pipe
- Smoked Corner markers

https://farm6.staticflickr.com/5639/...ffde6cac_o.jpgIMG_6091 by Jessie Alex Gabbuat Jr, on Flickr

https://farm6.staticflickr.com/5754/...5960b533_o.jpgIMG_3367 by Jessie Alex Gabbuat Jr, on Flickr

https://farm1.staticflickr.com/723/2...9aa0b7d2_o.jpgIMG_3362 by Jessie Alex Gabbuat Jr, on Flickr

https://farm1.staticflickr.com/611/2...0d40aa23_o.jpgIMG_3378 by Jessie Alex Gabbuat Jr, on Flickr

https://farm6.staticflickr.com/5797/...42c2b3cc_o.jpgIMG_3363 by Jessie Alex Gabbuat Jr, on Flickr

https://farm6.staticflickr.com/5768/...77faab6a_o.jpgIMG_3373 by Jessie Alex Gabbuat Jr, on Flickr

http://www.ft86club.com/forums/attac...1&d=1437638805 Damn looks like this one street in Compton I know.



I dig it. Does that Z in BRZ seem crooked or just the pic?

Get some gold wheels on that beast!

I think it was to be honest, I could never really tell. Well, it was pulled off the car so I could mount my TRD wing. Won't need to worry about being crooked no more :lol: but thank you! Hope I can get wheels on soon.. been thinking of some bronze or gunmetal wheels.

It's been awhile but, alot has changed with this build. Over the course of a few months, I've collected a few parts and went with a different direction. I've always loved the style of old 90's drift cars in japan and always wanted to somehow bring it towards my car. I bought some SSR Vienna Courages in 18x8.5 +43, +30 on a 215/40/18.. planning on relipping. I'm using ISC conversion spacers 15mm, yes I had to cut my studs. Other parts still on the side, but... overall slowly but surely I'll get those little details done.



[IMG]https://farm2.staticflickr.com/1601/...5d363a36_o.jpgIMG_0017 by Jessie Alex Gabbuat Jr, on Flickr[/IMG]

Decided to enter Spocom Hawaii. First show, and it was very humbling to be apart of it. Hoping to enter the next show here in HI.

https://c4.staticflickr.com/9/8783/2...c43acdab_o.jpgIMG_2887 by Jessie Alex Gabbuat Jr, on Flickr

https://c3.staticflickr.com/9/8270/2...dcdf2943_o.jpgIMG_2907 by Jessie Alex Gabbuat Jr, on Flickr

I'll update as more pictures are processed, just a picture of the car during roll in.

Just a little update...

Finally installed my rucas and fine tuned the front camber a bit. All I really want right now is fatter tires in the rear (225/40's opposed to my 215's) and upping the front tire size to a 40 series tire. Other than that, everything is dialed in and I couldn't be happier. I haven't driven the car since the show because I knew everything wasn't set up the way I wanted and haven't had time to dial in anything. Took some time off and this is the result:

https://c5.staticflickr.com/6/5800/3...9a72476c_h.jpgIMG_2861 by Jessie Alex Gabbuat Jr, on Flickr

https://c4.staticflickr.com/9/8136/3...09211709_h.jpgIMG_2862 by Jessie Alex Gabbuat Jr, on Flickr

https://c6.staticflickr.com/6/5490/3...5af3d6d7_h.jpgIMG_2867 by Jessie Alex Gabbuat Jr, on Flickr

[img]https://c2.staticflickr.com/6/5522/30189937481_***7a0b401_h.jpg[/img]FullSizeRender by Jessie Alex Gabbuat Jr, on Flickr

Sadness
 

Car got rear ended during thanksgiving.. however, insurance is covering everything. Damage is too brutal to show, but new carbon trunk is on order, new diffuser, new bumper etc.

For the time being I lowered the car, and just got the fitment to where I want it to be.

215/40 Yokohama S Drives 225/40, They're a tad fatter than I thought, but now I know. Possibly do 205's and 215's next time.

https://c1.staticflickr.com/1/536/30...a0d714c4_b.jpgCurrent Setup 12/13/16 by Jessie Alex Gabbuat Jr, on Flickr