Forgestar F14 18x8.5 +34 18x9.5 +34
 

New wheels! Got them powdercoted Midnight Metallic powdercoat made by Prismatic Powders

https://farm4.staticflickr.com/3822/...a460e80c_b.jpg

https://farm4.staticflickr.com/3677/...5a21c38f_b.jpg

https://farm4.staticflickr.com/3753/...4277ab01_b.jpg

https://farm1.staticflickr.com/551/1...f2dee820_b.jpg

https://farm4.staticflickr.com/3730/...cb03f499_b.jpg

:drool::drool: oh my!!

Beautiful, thanks for sharing.

looking good! what size tires you running? i just ordered a similar set up.

245/35/18 and 255/35/18

Any photos from the side? +34 with 9.5 is probably poking for the fronts

the fronts are 8.5's

I'm a noob when it comes to a combination of wheels, tires, and lowering the car. This is a thread where (although lots of trolling) say that there's no way we can run a lowered twin on 18" wheels.

I really want to get the F14's but also bag my car as well (or at least get some nice coilovers), so I just wanted to know .. how has the 18"s on a lowered car been working out for you? Any issues?

sick! Love me some Forgestar wheels

If you go full lock, do the 245s grab the fender liner? I've got 235s on 8.5 +33 F14s on the front and I'm darn close. Would love to run 245s next.

They don't rub whatsoever. -1.6 camber up front.

That looks amazing, i wanted to get something with a lip next but you may have changed my mind.

When I first looked at your photos, I thought, "Those aren't F14's, they look totally different from mine!". Then I realized as I scrolled that it is just the color you did them makes the transition from the spoke area to the center well/bore section look a lot harder. It appears at first more like the edge on an RPF-1 until you look more closely and see it is in fact the gradual curve of F14.

Nice looking wheels!