[B is for Build] BRZ resurrection build
 

Welcome to my BRZ build thread!

Im actually moving this thread from another site to ft86club, so youll see 3 posts and then be all caught up!

I got this car at auction, pretty rough. Im learning new stuff about it every day and planning different things for the build.

Its a 2013 limited edition. Unfortunately its a 6spd automatic, but it does have paddle shifters and all the options.

Ill start with some pictures from the auction yard.

http://i.imgur.com/QpMhoRb.jpg

http://i.imgur.com/KAy88wN.jpg

http://i.imgur.com/LlmaqOV.jpg

http://i.imgur.com/HXlx4r9.jpg

http://i.imgur.com/9yKeHb1.jpg

http://i.imgur.com/ZUkVHkm.jpg

http://i.imgur.com/CkwKIvK.jpg

http://i.imgur.com/dW2Ymyy.jpg


Heres a few i took. Before we get into the teardown.

http://i.imgur.com/OKI59OAh.jpg

Looks like it has some aftermarket springs

http://i.imgur.com/liR7Dkzh.jpg

http://i.imgur.com/CEaPTPLh.jpg

http://i.imgur.com/m5zbUXNh.jpg

Heres last week when i took delivery

http://i.imgur.com/0W4nrH3h.jpg

http://i.imgur.com/RLlL094h.jpg

Heres where the real bad news set in, if you notice, the engine is higher on the left side than the right :(

http://i.imgur.com/8gKmPNUh.jpg

I popped the bumper off pretty quick to get a little better view of the damage

http://i.imgur.com/fHLDk05h.jpg

Heres a quick little video of the front end end teardown. I got it down to the frame, found out its a little extra banged up. In the end i got alot of space opened up.
I need to get under the car and figure out why the engine is unbalanced before i decide if im going to take the frame to a shop and get it pulled and straightened.


[ame="https://www.youtube.com/watch?v=haGOU-wnWwE"]BRZ front clip tear down - YouTube[/ame]


Funny damage i found that was repaired from the previous owner, looks like hes heard of drift stitching
http://i.imgur.com/9bEU3jjh.jpg

Sad electrical damage :( ill need to find a diagram of this and replace all the relays.

http://i.imgur.com/XcIeVzch.jpg

Thats all i got for now. More to come soon.

Quick small update for everyone.

I got a new jack ( since my other car is on my other one -_- ) this first pic shows where i think the frame is pushing up the motor. I think this part bent in and is pushing the left side of the motor up, or at least i hope.
http://i.imgur.com/r5meQbW.jpg

Here you can see some frame damage and not damage, the 2 circles up top are not damaged parts, which is a good sign, it looks like everything from the subrame back is not all bent up.
The lower part is pushing the passenger side control arm back, which has got the wheel and all the steering geometry screwed up.
http://i.imgur.com/I6okkDU.jpg

Heres a second view of the same problem area
http://i.imgur.com/JDZJWI1.jpg

So the plan now is to find a local shop that can pull these parts back straight and get an estimate. Ill call around to a few shops tomorrow and check back in with any updates.

Small update, i was able to find a shop to pull the frame back into place and do an alignment. Ill hear back tomorrow if its the frame that is holding the left side of the motor too high, or if its a broken motor mount or something like that. I met the guy today thats going to be doing the work on my car and he seems like a cool guy and has a full shop so one way or another i expect the car to come back next week with a straight frame and a motor sitting level.

Heres a few pics of the car being loaded up. Once i hear back from the shop saying its for sure fixable, its time to start the fun part of ordering parts.
http://i.imgur.com/IU70smdl.jpg
http://i.imgur.com/1A1wne1l.jpg
http://i.imgur.com/wWtmqsQl.jpg

damn good luck with this!

more and more of these threads are popping up lately!

:thumbsup:

thanks WhiteFRS69!

Is there any good way to link to a youtube video on here and have it be embedded? I need the tubes!

nvm googled it and figured it out

Sorry its been so long since the last update. My car was at a frame straightening shop and it took a while for different parts to get in.

Once i heard the car was able to be fixed, i started ordering parts and decided if the motor is fatally .

Some things i ordered:
FRS front bumper and fog lights
New black housing headlights
Hood
Pass Fender
Rocket Bunny v1 Widebody kit
18x10 wheels and tires
Performance Radiator
AC Condenser
AC Fan

and a buncha misc parts for the repairs, and ill go through installing all those things once i get there.

http://i.imgur.com/aJuw0uSh.jpg

http://i.imgur.com/NExRmMTh.jpg

The car came back from the frame shop in pretty good condition.

Had to have it towed home once again :( hopefully the last time its on a tow truck

http://i.imgur.com/h8X1v87h.jpg

You can see the shop cut the front lower bar crossmember so ill be welding some support bars between there pretty soon.

http://i.imgur.com/ZL9Gx2Fh.jpg

But overall im really happy with out straight things turned out, im actually not expecting too many headaches getting this thing rebuilt

http://i.imgur.com/qzZGVhzh.jpg

http://i.imgur.com/xtyhp5ph.jpg?1

Today i went down to the hardware store and got some materials.
1in angle iron to rebuild the front core support and support the lower cross member.
3in PVC pipe to build a ghetto air intake for the time being
10ft of 2in steel pipe to build a new bumper "crash bar"
and some wood to help out with the mocking up process.

Should be a fun time

http://i.imgur.com/MmzlGhIh.jpg

Ill film and post up a video of me rebuilding the core support.

In for more details and pics. Inspiring.

Finally an update!

Weve switched from taking pictures and doing write-ups to filming videos.
Its alot faster for us and we have more builds and ideas for the future its going to be more fun to film them all and have them all in one place online.

Our first video as a real channel is located here

[ame="https://www.youtube.com/watch?v=JAfzPHA_QcY"]BRZ Resurrection Part 1 - YouTube[/ame]

Please subscribe to follow along with us on this build and more in the future.

And obv ill keep updating this thread answering any questions and posting update videos.

Part 2!

[ame="https://www.youtube.com/watch?v=H4BOHfbVPqQ"]BRZ Resurrection Part 2 - YouTube[/ame]

Any feedback is appreciated!

Were the springs in good condition? Maybe you can sell it for a quick buck!

yeah the springs were in good condition, do you mean sell the springs or the car?

Part 3 is up!
In this video I build a front impact bar for the BRZ out of spare parts i had lying around.
[Dont try this at home.]

[ame]http://www.youtube.com/watch?v=YoxSTZsUjSg[/ame]

Part 4 is up, small road bump but weve got a plan!

[ame]http://www.youtube.com/watch?v=XTV6myKC40I[/ame]

part 5 is up, check it out!

[ame]http://www.youtube.com/watch?v=M2JXiVUduJw[/ame]

Episode 6 is up! Rocket Bunny Widebody BRZ time!
[ame]http://www.youtube.com/watch?v=Nvo49RfM76g[/ame]

how far away is the next episode? love this build!

How much did you pick up this salvaged vehicle for, if you don't mind me asking?

Really enjoying the vids!

Picked up the car originally for about 5500, maybe 6K i cant really remember theres always hidden fees. Then the frame straightening guy charged me like 1700 for a crappy job.

Our channel B is for Build is going on kinda a tangent, here is episode 7, but as you can see we picked up a few more projects. I duno if i should keep posting links to new episodes in here or somewhere else since most wont be BRZ related..

[ame]http://www.youtube.com/watch?v=X-GlQp9dggk[/ame]

Actually now that i checked this is just the members car journal section, and thats still a fitting category, so ill keep posing in this thread for people that want to follow along.

hopefully you don't destroy the flares when you drill those rivets out to cut the quarter panels when you finish the rear

I knew they would have to go on and off a few times so i used aluminum rivets and only put in 3 on each side, ive already drilled out the passenger side without any damage.

for future builds you should invest in some klekos

just googled them, ill do that!

the road trip continues!
[ame="https://www.youtube.com/watch?v=uy3oHusI38w"][B is for Build] Road Trip Episode 2 - Fixing Bumpers & Making Windows - YouTube[/ame]

Oh hey I know that guy Jeff, lol - subscribed. Great work thus far!

Road trip part 3 is up!

[ame]http://www.youtube.com/watch?v=hSoU1_SlzBQ[/ame]

Road trip part 4 is up, some fun replacing the radiator in the rain and driving to the beach going on.
[ame]http://www.youtube.com/watch?v=ErnQ7XtkUxA[/ame]

Road trip part 5 is up!

[ame]http://www.youtube.com/watch?v=nyLDBC7LxmU[/ame]

What happened to the brz build?


Sent from my iPhone using Tapatalk

its on pause till we get back from the roadtrip. Itll be back in october.

New episode is up, some 0-60-0 racing and cooking under the hood!
[ame]http://www.youtube.com/watch?v=8TVodNvUZbo[/ame]

Budget street cred! and a new car is added to the B is for Build garage!
[ame]http://www.youtube.com/watch?v=qh4Q3Fgjan0[/ame]

The road trip is over, the BRZ is back! I decided to ditch the vinyl job in favor of a good old fashion budget paint job.
[ame]http://www.youtube.com/watch?v=8SkSXVHT3HI[/ame]

Budget paint job part 2! dont worry im not giving up yet!
[ame]http://www.youtube.com/watch?v=tNGztM32dr8[/ame]

not gonna let the paint go down without a fight!
[ame]http://www.youtube.com/watch?v=wX3eGOh67ms[/ame]

more paint!!!!!! always more paint!!
[ame]http://www.youtube.com/watch?v=mUm-XjX8Co4[/ame]

Got some headlights and the front bumper bolted up!
[ame]http://www.youtube.com/watch?v=ViulDPgKgMA[/ame]

[ame]http://www.youtube.com/watch?v=6htUdrtTv5o[/ame]