Is this normal? OFT
 

Hey guys, I just flashed to UEL Stage 2 E85. Do these values look normal?? They are different than what I had with the EL stage 2 E85 tune. Especially the AFR and fuel trims. This log is recorded during the 90-100 mile number after flash.

My setup. MXP catless header + overpipe, berk high flow cat front pipe, q300 catback and E85. Also I never got a CEL light but if I check codes with OFT I get fault codes p015a and p015b.

http://www.datazap.me/u/dnuorgrednu2...5?log=0&data=1

Thanks.

You should probably post this in the Data Log sticky thread in the Software and tuning section

Didn't know there was one. Sorry if mod wants to move go for it