Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Affordable Mods (https://www.ft86club.com/forums/showthread.php?t=90397)

S84kam 06-20-2015 08:26 PM

Affordable Mods
 
Hey guys, I want to share some things with you that will cost you a bit over 15 bucks. Here it is, from Aliexpress is the stitched ebrake http://www.aliexpress.com/snapshot/6...67035306928907

The BRZ brake kit is over 100$... so you can decide. I'm cheap I'd rather spend 15$ ish

All you need to do is get a hair dryer and some gloves. Heat your stock brake handle for about 2 minutes and use both hands to pull it off like so.
http://i12.photobucket.com/albums/a2...psu2liwfjf.jpg

cut the lower middle piece like so
http://i12.photobucket.com/albums/a2...psjn2bac3g.jpg

slide your new stitched ebrake on.
http://i12.photobucket.com/albums/a2...psqfhuu75y.jpg

and now notice how the stitch colour matches perfectly. Grab a beer and celebrate!
http://i12.photobucket.com/albums/a2...pszg8yl2aq.jpg

FiRStsc10n 06-20-2015 09:13 PM

Great find. Hope this thread continues with some other affordable mods.

Fishbed77 06-20-2015 09:24 PM

Can you add a pic of how it looks from the front (around the thumb button)?

S84kam 06-20-2015 09:37 PM

Quote:

Originally Posted by Fishbed77 (Post 2294312)
Can you add a pic of how it looks from the front (around the thumb button)?

fits almost perfectly, you can't see much of the bare steel when sitting down

http://i12.photobucket.com/albums/a2...pststiklc7.jpg


http://i12.photobucket.com/albums/a2...psvinqt3dw.jpg

S84kam 06-20-2015 09:46 PM

another affordable mod - FLUSH EXHAUST TIPS - specifically for 2015+ exhaust tips

I used 2 1/4/ outside and 2" Inside diameter exhaust tips. i used JB Weld to glue it on and just screwed the exhaust tips to get them flush. Pure sex and it was 10 bucks!!!!!!!

http://i12.photobucket.com/albums/a2...psavkkx0qw.jpg


Before
http://i12.photobucket.com/albums/a2...psjci4pmeu.jpg

after
http://i12.photobucket.com/albums/a2...psniwrhcxr.jpg

10$ satisfaction = more beer money

http://i12.photobucket.com/albums/a2...ps7yjxsyxx.jpg

wildpandaz 06-20-2015 10:50 PM

Quote:

Originally Posted by S84kam (Post 2294325)
another affordable mod - FLUSH EXHAUST TIPS - specifically for 2015+ exhaust tips

I used 2 1/4/ outside and 2" Inside diameter exhaust tips. i used JB Weld to glue it on and just screwed the exhaust tips to get them flush. Pure sex and it was 10 bucks!!!!!!!

http://i12.photobucket.com/albums/a2...psavkkx0qw.jpg


Before
http://i12.photobucket.com/albums/a2...psjci4pmeu.jpg

after
http://i12.photobucket.com/albums/a2...psniwrhcxr.jpg

10$ satisfaction = more beer money

http://i12.photobucket.com/albums/a2...ps7yjxsyxx.jpg

Can you get some pictures from directly behind the car please?

Figo 06-20-2015 10:57 PM

another affordable mod is stickers.

And you gain horsepower.

.

ZOMFGAARON 06-20-2015 11:06 PM

Affordable Mods
 
Quote:

Originally Posted by S84kam (Post 2294323)
fits almost perfectly, you can't see much of the bare steel when sitting down



http://i12.photobucket.com/albums/a2...pststiklc7.jpg





http://i12.photobucket.com/albums/a2...psvinqt3dw.jpg


This would probably look better with a drift button since the hole for the ebrake button looks huge.


Sent from my iPhone using Tapatalk

S84kam 06-22-2015 07:42 PM

Quote:

Originally Posted by wildpandaz (Post 2294377)
Can you get some pictures from directly behind the car please?


http://i12.photobucket.com/albums/a2...psnfziaukq.jpg

S84kam 06-29-2015 05:07 PM

http://i12.photobucket.com/albums/a2...psvyu5ynl4.jpg

http://i12.photobucket.com/albums/a2...psdhe29rur.jpg


By far the cheapest mod. 00.45$

Leonardo 06-29-2015 06:34 PM

Free.

You can unhook the DRL relay for a more symmetrical headlight look. (it turns off the one headlight that is on at half power or something)

I have a Chromax Titanium golf ball as my shift knob. I found it. They cost about $3 retail each.

My dog chewed the OEM one... I had the ball laying around...
http://www.intheholegolf.com/CH-SILV...---Silver.html

soulreapersteve 06-29-2015 07:44 PM

Two very minor mods that aren't pricey at all are bulb upgrades for the license plate (which I bought today) and plaque for the center console hole.

The bulbs from Diode Dynamics start out at 5 dollars, I got the HP3's for 12.

http://www.diodedynamics.com/store/l...nse-plate-leds


The plaques from Yospeed are 20, I got the Limited Editions for 25.

http://yospeed.com/limited-edition-frs-brz-plaque/

Down the line, I'll get the LED dome light and HID kit from Diode Dynamics also. :) Hope more people add to this thread, really fun to see what others are doing!

Lonewolf 06-30-2015 12:02 AM

Aftermarket drop-in air filter...50 bucks for better throttle response, slight mpg improvement....but at the expense of filtration of finer particles

KungFuWaffle 06-30-2015 02:39 AM

1 Attachment(s)
$20 shift boot and $35 e brake cover and Yospeed's center console plaque , to spice up the interior. Although I got my covers for free cause the guy who made them needed measurements


All times are GMT -4. The time now is 03:12 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.