Will the exhaust fit in the trunk
 

Picking up invidia n1 today, I'm not sure if all the pieces are together or seperate as i am buying it used

I can't put my back seats down as i Have the children sitting there

Will it fit easily in the trunk?

It will need to be taken apart, but i think it will fit in there.

My Perrin fit easily into the trunk, stock won't fit without the seats down (mid pipe is too long). I haven't seen an N1 in pieces, but I would imagine it should be comparable to the Perrin for pipe lengths.

My Q300 fit just fine. Take it out of the box and then play tetris with your car

If not, just put the seat down and pack the kids around it ...... :popcorn:


humfrz

Make the kids hold the mid pipe. Rest will fit.

I had to fold my seat down to fit the mid pipe of my Injen SES exhaust.

Same. I fit my Q300 in my trunk, with other junk in there(heh) and it was easy in and out. As for the stock exhaust, I had to put my seat down and move the passenger seat up all the way, as it went from the back left of the trunk to the passenger door.

Just to clarify, the midpipe will fit with the seats down? Does it sit the middle between the two front seats?

I had the entire stock exhaust totally assembled in my car one lol

My Injen exhaust's midpipe fit diagonally from the rear corner of the trunk to the back of my seat. Didn't have to rest on the center console.

I fit my N1 in my frs with the seats not there and it has to be taken out the box

My hks hi power fit perfectly but you will need to take apart and drop the seats. the cans, y splitter pipe and mid pipe all came apart so it was perfect. i believe invidia does the same? correct me if im wrong.

Fits fine. Put it in my trunk when I got it

Then after it was installed I had the oem overpipe, headers, frontpipe, and catback in the car, seats down of course.

Another hit and run thread :thumbdown: