Mackin/EvasiveMotorsports/Greddy Competing at Pikes Peak 2016 2JZ 800+WHP
 

Evasive Motorsports is prepping and tuning the Mackins FR-S for the Famous Pikes Peak International Hill Climb for 2016. We teamed up with Mackin Industries to do a major make over with this FR-S. Decided to ditch the FA20 and go with something a little more power friendly.

These last few months have been hectic as the Evasive team worked day and night to get the Mackin Industries Scion FR-S race-ready for Pikes Peak this coming Sunday, June 26th 2016. This will be our fourth year participating in the 12.42-mile race held in Colorado Springs, CO with Mackin Industries and GReddy. Rob Walker aka MaxRev will be piloting the Mackin Scion FR-S for this years race, making this his fourth race in the mountains. Last year the engine gave out towards the top, so this year we are coming back more prepared with more power and plenty of upgrades to the car which include 3.4L stroked 2JZ drive by wire, Garrett GTX4292R mated to a Samsonas sequential transmission, Advan GT’s wrapped in Yokohama tires, Wisefab Grip Kit, and more.

New Livery finished with the help of the guys from Autotuned

https://c2.staticflickr.com/8/7189/2...c0f2a98d_b.jpg

https://c2.staticflickr.com/8/7236/2...98f10043_b.jpg

New Transplant

https://c2.staticflickr.com/8/7301/2...7d68feb7_b.jpg

Few Interior Shots (did not have anytime to clean it up)

https://c2.staticflickr.com/8/7048/2...cebbb0c3_b.jpg

https://c2.staticflickr.com/8/7412/2...14cb9d5f_b.jpg

https://c2.staticflickr.com/8/7367/2...6526eb16_b.jpg

Samsonas Sequential Transmission

https://c2.staticflickr.com/8/7782/2...04794225_k.jpg



https://c2.staticflickr.com/8/7117/2...2a71b09c_b.jpg

the center exhaust, lol damn.

More pix please! Moooooooore!

Lovin that center exit straight pipe exhaust. Can't wait to hear this beast.

omggggg no crashbar omgggggg

j/k :)

Unreal car. I seriously have some wood right now

Nice!

Good Luck Evasive!!

Amazing setup!!

Stocked to see this thing tearing the Pikes Peak!!

Subscribed !

Dat FBM oil pan doe.

Who makes the carbon fiber looking pieces that go up and around the top of the door opening?

Probably the only thing I can afford off the car haha

Which class are you running in?

Dyno Video and Graph from our mustang Dyno

[ame]http://www.youtube.com/watch?v=MgpqTnYEwfY[/ame]

http://i102.photobucket.com/albums/m...psruktzxxr.jpg

What transmission are you running?

https://farm6.staticflickr.com/5586/...cda8a4e9_b.jpg
https://farm4.staticflickr.com/3946/...00ff0206_b.jpg
https://farm6.staticflickr.com/5613/...c9894c8e_b.jpghttps://farm4.staticflickr.com/3710/...d5b85033_b.jpghttps://farm6.staticflickr.com/5339/...0d920bfb_b.jpghttps://farm4.staticflickr.com/3845/...85eaf719_b.jpghttps://farm4.staticflickr.com/3686/...302fd61e_b.jpghttps://farm6.staticflickr.com/5584/...221cf96c_b.jpg